Procedure

1. Start the engine.
2. Check the idle speed in P range, refer to EMISSION CONTROL SYSTEM.

Idle speed: 700-800 rpm (with parking brake applied)

3. Shift from N range to D range.
4. Use a stopwatch to measure the time it takes from shifting until shock is felt.
5. Shift the selector to N range and run the engine at idle speed for at least one minute.

NOTICE: Make three measurements for each test and take the average value.

6. Perform the test for the following shifts in the same manner.
A. N-D range
B. N-D range (O/D OFF mode)
C. N-R range

Time lag: N-D range 0.5-0.6 second
Time lag: N-R range 0.6-0.7 second