From VIN S5220000

Park, license, side marker, and tail lights
With the light switch in PARK or HEAD, battery voltage is applied through the TAIL fuse to the park, front side marker, tail and license lights. The lights illuminate.

Turn signal and Hazard lights
Turn lights
With the ignition switch in ON or START, battery voltage is applied through the METER fuse to the turn signal switch. With the turn signal switch in the left turn or right turn position, battery voltage is applied through the turn signal switch to the flasher module. The flasher module will alternately open and close a solid state switch which will send pulses of battery voltage to the appropriate turn lights and the turn indicator. The turn lights and indicators flash.

Hazard lights
With the hazard switch in the ON position, a ground signal is sent to the flasher module. The flasher module will alternately open and close two solid state switches which will send pulses of battery voltage to the turn lights and the turn indicators. The lights flash. The hazard lights are also operated by the electronic time and alarm control module. See Theft Deterrent System for details.

Brake lights
Battery voltage is applied to the brake pedal switch at all times from the STOP fuse. With the brake pedal depressed, the brake pedal switch is closed and battery voltage is applied to all the stop lights and the lights illuminate.