Fuel Pump: Service and Repair

Description:

WARNING:
- Before performing the following procedures, perform Fuel Pressure Release Procedure to remove pressure from the fuel system to reduce the possibility of injury or fire.
- When replacing the fuel system parts, keep sparks, cigarettes, and open flames away from the fuel.-

1. Push the rear seat cushion release buttons and remove the cushion.
2. Remove the fuel pump cover.
3. Disconnect the fuel pump connector.
4. Disconnect the fuel hoses.
5. Remove the fuel pump and fuel tank gauge sender unit assembly.

CAUTION:
^ Secure the fuel hoses tightly.
^ Use a new rubber seal.

6. Install in the reverse order of removal.