Fuel Pressure Regulator: Service and Repair

Description:

REPLACEMENT

WARNING:
- Before performing the following operation, perform Fuel Pressure Release Procedure to remove pressure from the fuel system to reduce the possibility of injury or fire.
- When replacing fuel system components, keep sparks, cigarettes, and open flames away from the work area.

1. Disconnect the vacuum hose.
2. Disconnect the fuel return hose.
3. Remove the pressure regulator.
4. Install in the reverse order of removal., using a new O-ring.

Tightening torque: 69 - 95 in lb. (7.8 - 11 Nm)