Rear Stabilizer Bar

Replacement

1. Remove the rear wheel & tire.

Tightening torque :
88.3 - 107.9N.m(9.0 - 11.0Kgf.m, 65.1 - 79.6lb-ft)

2. Remove the rear sub frame.
3. Disconnect the stabilizer link(A) with the rear knuckle by loosening the nut.

Tightening torque :
58.8 - 78.5N.m(6.0 - 8.0Kgf.m, 43.4 - 57.9lb-ft)




4. Disconnect the stabilizer bar with the rear sub frame by loosening the nut.

Tightening torque :
34.3 - 44.1N.m(3.5 - 4.5Kgf.m, 25.3 - 32.5lb-ft)








5. Remove the clamp(A) and bushing(B) from the rear stabilizer bar.




6. Installation is the reverse of removal.

Inspection

1. Check the rear stabilizer bar for deformation.
2. Check the rear stabilizer link ball joint for damage.