Repair Procedures

Removal

1. Disconnect the negative(-) battery terminal.
2. Remove the monitor hole cover (A).




3. Remove the RSE LCD monitor assembly (A) after loosening 4 bolts on the roof panel or roof rail.




4. Disconnect the connector(24P) from RSE LCD monitor.

Installation

1. Connect the monitor connector on the RSE monitor assembly until a click sound is heard.
2. Install the RSE LCD monitor assembly on the roof panel.
3. Fix the monitor on the sunroof bracket by clips (3EA) and then tighten the bolts (4EA).
4. Push the RSE hole cover on the monitor assembly until a click sound is heard.