Trailing Arm: Service and Repair

Replacement

1. Remove the rear wheel & tire.

Tightening torque :
88.3 - 107.9N.m(9.0 - 11.0Kgf.m, 65.1 - 79.6lb-ft)

2. Disconnect the trailing arm(A) with the rear knuckle by loosening the bolt & nut.

Tightening torque :
137.3 - 156.9N.m(14.0 - 16.0Kgf.m, 101.3 - 115.7lb-ft)




3. Disconnect the trailing arm(A) with the rear knuckle by loosening the bolt & nut.

Tightening torque :
137.3 - 156.9N.m(14.0 - 16.0Kgf.m, 101.3 - 115.7lb-ft)




4. Installation is the reverse of removal.

Inspection

1. Check the bushing for wear and deterioration.
2. Check the rear assist arm for deformation.
3. Check the ball joint for damage.
4. Check for the all bolts and nut.