Fuel Filler Neck: Service and Repair

Removal

1. Remove the protector (A).




2. Remove the rear-LH wheel, tire, and the inner wheel house.
3. Disconnect the fuel filler hose (A).




4. Disconnect the ventilation hose quick-connector (A).




5. Remove the filler-neck assembly from the vehicle after removing the bracket mounting nuts (A).






Installation

1. Installation is reverse of removal.

Filler-neck assembly bracket installation nut :
3.9 - 5.9 N.m (0.4 - 0.6 kgf.m, 2.9 - 4.3 lb-ft)