Repair Procedures

Removal

1. Remove the wheel & tire.
2. Disconnect the brake tube by loosening the tube flare nut (B).

Tightening torque:
12.7 - 16.7 N.m (1.3 - 1.7 kgf.m, 9.4 - 12.3 lb-ft)

Front





Rear




3. Remove the brake hose clip (A).
4. Disconnect the brake hose from the brake caliper by loosening the bolt (C).

Tightening torque:
24.5 - 29.4 N.m (2.5 - 3.0 kgf.m, 18.1 - 21.7 lb-ft)

Front





Rear






Inspection

1. Check the brake tubes for cracks, crimps and corrosion.
2. Check the brake hoses for cracks, damage and fluid leakage.
3. Check the brake tube flare nuts for damage and fluid leakage.
4. Check brake hose mounting bracket for crack or deformation.

Installation

1. Installation is the reverse of removal.

CAUTION:
Use a new washer (A) whenever installing.




2. After installation, bleed the brake system.
3. Check the spilled brake oil.