Accelerator Pedal: Service and Repair

REMOVAL

1. Turn ignition switch off and disconnect the battery (-) cable from the battery.
2. Disconnect the accelerator position sensor connector (A).




3. Unfasten the mounting bolt/nuts (B) and remove the accelerator pedal from the vehicle.

INSTALLATION

1. Install the accelerator pedal in according to the reverse order of "REMOVAL" procedure.

Accelerator pedal mounting nuts: 7.8 - 11.8Nm (0.8 - 1.2kgf-m, 5.8 - 8.7lbf-ft)