Parking Brake Lever: Adjustments

ADJUSTMENT PROCEDURE

PARKING BRAKE BED-IN (DIH)
1. When the parking brake lever is pulled with force of 15 kg(f), drive the vehicle 500m at 60 kph, or accelerate to 60 kph on a roll device.
2. Repeat step 1 more than 2 times.
3. Parking should be possible on a hill of 30% with gross vehicle weight.

NOTE:
- BED-IN : Procedure of operating the vehicle with parking brakes active for the purpose of setting the position of the brake pads.
- DIH (Drum in hat) : Disk brake type parking system.