Rear Disc Brake

DISASSEMBLY SERVICE POINT
1. Remove the piston boot/piston.
Wrap the caliper body with a rag. Blow compressed air into the brake hose, and remove the piston and the piston boot.

CAUTION:
Blow air slowly.




2. Remove the piston seal.
(1) Remove the piston seal with your finger.

CAUTION:
Do not use a screwdriver or another tool in order to avoid damage the inside of the cylinder.

(2) Clean the piston surface and the inside of the cylinder using trichloro-ethylene, alcohol or the specified brake fluid.

Brake fluid : DOT 3 or DOT 4