Center Pillar Trim

REMOVAL AND INSTALLATION

CENTER PILLAR TRIM
1. Remove center pillar lower trim.
(1) Remove front door scuff trim.




(2) Remove rear door scuff trim.




(3) Remove seat belt lower anchor bolt (1).

Tightening torque :
40-55 Nm (4.0-5.5 kg-m, 29-40 lb-ft)





(4) Remove center pillar lower trim screws (2).




2. Remove center pillar upper trim.
(1) Remove seat belt upper anchor bolt (1).

Tightening torque :
40-55 Nm (4.0-5.5 kg-m, 29-40 lb-ft)





(2) Remove B pillar upper trim screws (2) and cover.