Transmission Oil Cooler - Installation

FLUID COOLER






CAUTION: Apply CVT fluid on the sealing area when installing the CVT fluid filter.

1. Install the CVT fluid filter (1) into the transaxle case (certain models).






CAUTION: Do not re-use the O-ring. Apply CVT fluid when installing the O-ring.

2. Install the new O-ring (1) onto the CVT fluid filter.





3. Install the CVT fluid cooler onto the transaxle case.
4. Install and tighten the mounting bolts to 4 Nm (37 in.lbs.).
5. Install the coolant lines (1) at the cooler.
6. Install the transmission lines (2) at the cooler (3).
7. Install the left front splash shield.
8. Install the left front tire.
9. Lower the vehicle.
10. Inspect the coolant level Service and Repair.
11. Inspect the transmission fluid level . CVT Automatic - Check Oil Level