Headlamp Bulb - Removal - Export

BULB - BI-HALOGEN HEADLAMP - EXPORT MK49

CAUTION: Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb life will result.





1. Disconnect and isolate the battery negative cable.
2. Reach behind the front lamp unit to access the bulbs from the back of the lamp housing (1).
3. Remove the molded rubber cover (2) from the back of the housing to access the bi-halogen bulb base on the reflector within the lamp housing.
4. Disengage the two metal latch tabs of the lamp wiring connector while disconnecting it from the bulb connector receptacle.
5. Firmly grasp the bulb base on the back of the front lamp unit reflector and rotate it counterclockwise about 30 degrees to unlock it.
6. Pull the bulb and base straight out from the keyed opening in the reflector.