Front Lamp Unit Bulb - Removal - Halogen Headlamp

BULB - HALOGEN HEADLAMP - DOMESTIC MK49

CAUTION: Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb life will result.





1. Disconnect and isolate the battery negative cable.
2. Reach behind the front lamp unit to access the bulbs from the back of the lamp housing (1).
3. Disconnect the Front End Module (FEM) wire harness connector from the low beam (2) or high beam (5) bulb base connector receptacle.
4. Firmly grasp the low beam or high beam bulb base on the back of the front lamp unit housing and rotate it counterclockwise about 30 degrees to unlock it.
5. Pull the bulb and base straight out from the keyed opening in the reflector.