FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.
Home >> Jeep Truck >> 2009 >> Commander 4WD V8-4.7L >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Starter Relay >> Service and Repair >> Starter Relay - Installation

Starter Relay - Installation






INSTALLATION

1. Push down firmly on starter relay until terminals are fully seated into PDC receptacle.
2. Install PDC cover.
3. Connect battery cable.
pro multis Credits:Operation CHARM About Operation CHARM