Position Lamp Bulb - Removal

BULB - POSITION LAMP

NOTE: The following procedure applies only to vehicles manufactured for export markets. Vehicles manufactured for North American markets do not have a position lamp bulb, socket or wiring provided in the front lamp unit.

1. Remove the front lamp unit from the front of the vehicle. Front Lamp Unit Boot - Removal.
2. Firmly grasp the position lamp bulb socket on the bottom of the front lamp unit housing and rotate it counterclockwise about 30 degrees to unlock it.
3. Pull the socket and bulb straight out from the keyed opening in the housing.
4. Pull the base of the bulb straight out of the socket.