Rear

BULB

NOTE: The following procedure applies only to vehicles manufactured for certain export markets where rear fog lamps are optional or required equipment. Rear fog lamps are not available in vehicles manufactured for North American markets.





1. Disconnect and isolate the battery negative cable.
2. Reach under and behind the rear bumper fascia (4) to access the bottom of either of the two rear fog lamp housings (1).
3. Firmly grasp the socket (3) on the bottom of the housing and rotate it counterclockwise about 30 degrees to unlock it.
4. Pull the socket and bulb (2) straight out from the keyed opening in the housing.
5. Pull the base of the bulb straight out of the socket.