Non-Adjustable Pedals

NON-ADJUSTABLE PEDAL

1. Install the pedal assembly to the vehicle.
2. Tighten the upper brake pedal sled nuts.









3. Install the lower steering shaft to the column.
4. Install the lower steering shaft pinch bolt at the column.
5. Unlock the steering wheel.
6. Install the 2 intermediate shaft bearing nuts (1).









7. Install the power brake booster Power Brake Booster - Installation.
8. Install booster push rod (2) on pedal pin (3) and install retainer clip (1) on pedal pin.
9. Reconnect the negative battery cable.
10. Fill and bleed brake system.
11. Check and adjust stop lamp switch if necessary.