Quarter Trim Panel - Removal

REMOVAL





1. Fold the second row seat (4) forward.





2. Position the C-pillar trim (1) out of the way C-Pillar Trim Panel-Removal.





3. Using a trim stick C-4755 or equivalent, release the retaining clips that secure the header trim molding in the liftgate opening and remove.





4. Using a trim stick C-4755 or equivalent, release the retaining clips that secure the scuff plate (1) and remove.





5. Remove the rear seat, Seat - Removal.





6. Remove the bolt (5) and remove the lower seat belt anchor (4).





7. Position the D-pillar trim aside, Removal.





8. Remove the three screws and separate the trim panel (3). Disconnect the electrical connector (2), if equipped.





9. For the right side trim, remove the three screws and separate the trim panel (3). Disconnect the electrical connector (1), if equipped.