Heating & A/C System: 84

84-SENSOR FAILED SHORTED DURING COOLDOWN TEST

For a complete wiring diagram, refer to the Wiring Information Electrical Diagrams.

- When Monitored:
When executing the Cooldown Test.

- Set Condition:
If the Evaporator Temperature Sensor input is out of range toward the low voltage threshold when executing the Cooldown Test.

NOTE: This DTC will display as active if the ignition is not cycled after running the Cooldown Test. Otherwise, it will display as stored until cleared.

Refer to EVAPORATOR SENSOR SHORTED for the diagnostic test procedure. 32