Instrument Panel Cluster Bezel - Installation

INSTALLATION





1. Insert the three rear tabs (2) into the I/P structure.




2. Position the front of the bezel (1) down into place and install the four side screws (2).




3. Position the end cap (1) onto the I/P and seat the retaining clips fully.




4. Install the two lower bezel screws (2).




5. Position the steering column opening cover onto the I/P and seat the retaining clips fully.




6. Position the top cover (1) onto the I/P and seat the retaining clips (3) fully, Instrument Panel Cover - Installation.