Instrument Panel Demister Ducts - Installation

INSTALLATION

NOTE: Illustrations shown with instrument panel removed from vehicle for clarity.

NOTE: LHD model shown in illustrations. RHD model similar.

DRIVER SIDE DUCT

NOTE: The driver side demister duct is serviced only as an assembly with the driver side instrument panel duct.





1. Position the driver side instrument panel duct and demister duct assembly (1) onto the top of the instrument panel support (5).
2. Connect the driver side instrument panel duct to the center duct (4). Make sure the ducts are fully engaged to each other.
3. Connect the driver side demister hose (3) to the demister duct. Make sure the hose is fully engaged to the defroster and demister duct.
4. Install the four screws (2) that secure driver side instrument panel duct and demister duct assembly to the instrument panel support. Tighten the screws to 2.2 Nm (20 in. lbs.).
5. Install the instrument panel top cover Instrument Panel Cover - Installation.
PASSENGER SIDE DUCT





6. Position the passenger side demister duct (5) to the instrument panel support (4) through the defoster duct opening.
7. Engage the demister duct retaining tab (3) to the instrument panel support.
8. Engage the demister duct push-pin type fastener (2) to the instrument panel support.
9. Install the passenger side instrument panel duct (6) Instrument Panel Ducts - Installation.
10. Install the passenger side demister hose (7) onto the demister duct.
11. Install the defroster duct (1) Defroster Ducts - Installation.
12. Install the instrument panel top cover Instrument Panel Cover - Installation.