Inspection and Verification

Inspection and Verification
1. Verify the customer concern by operating the system.
2. Visually inspect for obvious signs of mechanical and electrical damage.

Visual Inspection Chart

Mechanical Electrical
- Window glass. - Fuse(s).
- Window regulator. - Window motor.
- Loose or corroded electrical connector(s).
- Switch.
- Circuit(s).

1. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
2. If the concern is not visually evident, verify the symptom and refer to the Jaguar Approved Diagnostic System.