Heated Oxygen Sensor (HO2S)

Heated Oxygen Sensor (HO2S)

Removal
1. Raise and support the vehicle.






2. Detach the heated oxygen sensor (HO2S) electrical connector.






3. Disconnect the HO2S electrical connector.






4. CAUTION: Do not twist the H02S wiring harness on removal. Failure to follow this instruction may result in damage to the component.

Remove the HO2S.

Installation






1. CAUTION: Do not twist the H02S wiring harness on installation. Failure to follow this instruction may result in damage to the component.

To install, reverse the removal procedure.
- Tighten to 40 Nm.