Parking Brake Module - VIN Range: G45704->G99999 (70.35.47)

Parking Brake Module - VIN Range: G45704->G99999 (70.35.47)

Removal
1. Remove the luggage compartment floor covering.





2. Remove the luggage compartment side trim panel.





3. Detach the rear electronic module (REM).





4. Disconnect the parking brake module electrical connectors.





5. Detach the parking brake module.





6. Remove the parking brake module.





Installation

1. NOTE: If a new parking brake module is installed it must be configured using the Jaguar approved diagnostic system.

To install, reverse the removal procedure.

^ Tighten to 4 Nm.





2. Tighten to 10 Nm.