Parking Brake Module - VIN Range: G00442->G45703 (70.35.47)

Parking Brake Module - VIN Range: G00442->G45703 (70.35.47)

Removal
1. Remove the luggage compartment floor covering.





2. Remove the luggage compartment side trim panel.





3. Disconnect the parking brake module electrical connector.





4. Disconnect the parking brake module electrical connector.





5. Remove the parking brake module.





Installation

1. NOTE: If a new parking brake module is installed it must be configured using the Jaguar approved diagnostic system.

To install, reverse the removal procedure.

^ Tighten to 4 Nm.