Luggage Compartment Lid Moulding - VIN Range: H18680->H99999

Luggage Compartment Lid Moulding - VIN Range: H18680->H99999

Removal
1. Release the warning triangle retaining clip.







2. Remove the warning triangle.







3. Remove the warning triangle retaining bracket.
- Remove the retaining bolts.







4. NOTE: Federal market vehicles only.

Detach the luggage compartment emergency release handle.







5. Remove the luggage compartment lid grab handle.







6. Remove the luggage compartment lid latch trim cover.
- Remove the retaining clips.







7. Detach the luggage compartment lid courtesy lamp.







8. Remove the luggage compartment lid courtesy lamp.
- Disconnect the luggage compartment lid courtesy lamp electrical connector.







9. Remove the luggage compartment lid liner.
- Remove the retaining clips.
- Disconnect the courtesy lamp electrical connector.







10. NOTE: Left-hand shown, right-hand similar.

Remove the licence plate lamp.
- Release the retaining tangs.







11. Detach the luggage compartment lid moulding..
- Remove the retaining nuts.







Installation
1. To install, reverse the removal procedure.
- Tighten to 2 Nm.