Selecting AUTO/PAL/NTSC

Selecting AUTO/PAL/NTSC
To set the display screen module to the selected mode:
- turn the selected display screen on, so that the background is illuminated
- press and hold the MENU button until two choices are displayed, brightness and color
- press the MENU button twice to display the next screen. This will show four choices, dimmer mode, dimmer level, display mode, and NTSC/PAL
- press the MENU button to select NTSC/PAL. This will show three setting choices
- press the + or - button to select the desired setting (testing requires the screens to be set to AUTO)