Rear Quarter Window Glass Weatherstrip - Vehicles With: Convertible Top

Rear Quarter Window Glass Weatherstrip - Vehicles With: Convertible Top (76.40.33)

Removal

1. Fully lower convertible top.
2. Remove rear quarter capping.
1. Remove fastener securing rear quarter capping to 'B' post extension.
2. Slacken and remove three screws securing the capping,







3. Remove seat belt upper mounting bolt.
- Remove seat belt upper mounting bolt cover.
- Remove seat belt upper mounting bolt.







4. Lift rear quarter capping clear and remove from vehicle.
5. Remove four fir tree fasteners securing front of seal.







6. Remove screw securing rear of seal.







7. Clean seal carrier channel.

Installation

1. Apply a thin coat of Johnson KY Jelly or equivalent to carrier channel.
2. Install seal in carrier ensuring it is fully seated in channel.
3. Install fir tree fasteners at front of seal.
4. Install screw at rear of seal.
5. Position rear quarter capping and install screws.
6. Install seat belt upper bolt and tighten to 34-46 Nm.
7. Install cover over seat belt upper bolt.