Power Trunk / Liftgate Lock Switch: Service and Repair

Luggage Compartment Lid And Fuel Filler Door Release Switch (86.65.95)

Removal

1. Remove battery cover and disconnect ground cable from battery terminal.
2. Remove driver side underscuttle for access to lower fascia.
3. Release retaining tangs and withdraw switch assembly from driver side lower fascia.







4. Disconnect harness multiplug from fuel filler flap/trunk lid release switch assembly.







Installation

1. Install fuel filler flap/trunk lid release switch assembly to driver side lower fascia, ensuring that retaining tangs are fully seated.
2. Connect harness multiplug to switch assembly.
3. Install driver side underscuttle.
4. Connect ground cable to battery terminal and install battery cover.