Introduction

Introduction

It is very important to positively identify the area of concern before starting a rectification procedure. A little time spent with your customer to identify the conditions under which a problem occurs will be beneficial. See below for example:

Condition(s):

No defrost

Possible Source(s):
- No airflow to windshield

Action(s) to take:
- Check blowers and flaps

Possible Source(s):
- No function in defrost mode

Action(s) to take:
- Check A/CCM

Possible Source(s):
- Mode selection not available

Action(s) to take:
- Check control panel communication

Possible Source(s):
- Airflow OK but no heat

Action(s) to take:
- Check water pump and valve

Relevant criteria are: Weather conditions, ambient temperature, intermittent or continuous fault, airflow fault, temperature control fault, distribution fault and air inlet problem.