Lumbar Motor

Lumbar Motor (86.75.12)

Removal

1. Remove the front seat.
2. Reposition both front seat backrest hinge covers.







3. Release the front seat backrest cover rear lower retaining clips.







4. Remove the front seat backrest support panel.







5. Release the front seat backrest cover retaining straps.
- Remove and discard the hog rings.







6. Reposition the front seat backrest cover.
- Release the front seat backrest cover internal retaining clips.







7. Disconnect the lumbar motor electrical connector.







8. Remove the lumbar motor.







Installation

1. NOTE: Install new hog rings.

To install, reverse the removal procedure.