Front Seat Recliner Motor

Front Seat Recliner Motor (86.75.04)

Removal

1. Remove the front seat.
2. Reposition both front seat backrest hinge covers.







3. Release the front seat backrest cover rear lower retaining clips.







4. Remove the front seat backrest support panel.







5. Release the front seat backrest cover retaining straps.
- Remove and discard the hog rings.







6. Reposition the front seat backrest cover.
- Release the front seat backrest cover internal retaining clips.







7. Disconnect the front seat recliner motor electrical connector.







8. Remove and discard the front seat recliner motor wiring harness tie strap.







9. Remove the front seat recliner motor retaining bolt.







10. Remove the front seat backrest hinge trim covers.







11. Remove and discard the front seat recliner motor spindle retaining clip.







12. Reposition the front seat recliner motor spindle.







13. Remove the front seat recliner motor.







Installation

1. NOTE:
- Install a new spindle retaining clip.
- Install a new tie strap.

To install, reverse the removal procedure.