Instrument Panel Finish Panel

Instrument Panel Finish Panel (76.47.06)

Removal

1. WARNING: Following removal of the passenger air bag deployment door, new retaining clips must always be fitted.

Open Glovebox lid.

2. Withdraw passenger airbag deployment door for access.
3. Using a thin plastic lever, carefully release centre vent veneer panel tangs from fascia clips.







4. Remove and discard centre vent veneer panel securing clips.







Installation

1. Fit and fully seat new veneer panel securing clips in fascia.

2. WARNING: New passenger air bag deployment door, retaining clips must always be fitted.

Fit and fully seat veneer panel in securing clips.

3. Fit passenger air bag deployment door.
4. Close glovebox lid.