Radiator Grille Opening Cross Brace - Vehicles With: Supercharger

Radiator Grille Opening Cross Brace - Vehicles With: Supercharger (76.10.03)

Removal

1. Remove radiator closing panel.
2. Raise front of vehicle to working height and support on stands.
3. Remove undertray.
4. Slacken and remove two lower bolts securing front cruciform brace to BIW.







5. Supporting front cruciform brace, slacken and remove two bolts and nuts securing brace to upper support brackets.







6. Exercising care to avoid damaging radiator and condenser, lift front cruciform brace from vehicle.

Installation

1. Carefully lower cruciform brace into position between radiator and condenser.







2. Fit but do not tighten upper securing bolts and nuts.







3. Fit and tighten cruciform brace lower securing bolts.
4. Tighten cruciform brace upper securing nuts and bolts.
5. Position undertray on vehicle and secure with new plastic rivets.
6. Fit radiator closing panel.
7. Raise front of vehicle, remove stands and lower vehicle onto wheels.