Trunk / Liftgate Latch: Service and Repair

Luggage Compartment Lid Latch (76.19.25)

Removal

1. Remove trunk floor carpet.
2. Remove trunk rear finisher.
3. Remove tape securing lock mechanism harness and disconnect harness multiplug.







4. Slacken and remove lock mechanism securing bolts.







5. Position lock mechanism for access and disconnect lock barrel operating cable.







6. Disconnect trunk lock actuator operating cable







7. Remove lock mechanism from trunk lid.

Installation

1. Position lock mechanism in trunk lid.
2. Connect trunk lock actuator operating cable.







3. Connect trunk lock barrel operating cable.







4. Position and fully seat lock mechanism and fit but do not tighten securing bolts.







5. Connect trunk lock harness multiplug.







6. Close trunk lid, and check lock for satisfactory operation.
7. Open trunk lid adjust lock position as necessary and fully tighten securing bolts.
8. Secure harness to trunk lid with linen adhesive tape.
9. Fit trunk rear finisher.
10. Fit trunk floor carpet.