Rear Bumper Isolator

Rear Bumper Isolator (76.22.70)

Removal

1. WARNING: The rear bumper is close to the exhaust pipes which may be hot. Care must therefore be exercised when working in this vicinity.

Remove rear bumper cover and beam.

2. Remove rear strut.
1. Slacken and remove rear strut securing bolts.
2. Remove strut from body rear panel.
3. Remove and discard strut gasket.
4. Remove height adjuster spacer.







Installation

1. Fit rear strut.
1. Fit and align new strut gasket.
2. Position rear strut.
3. Fit and tighten strut securing bolts
4. Fit height adjuster spacer.







2. Fit rear bumper beam and cover.