Luggage Compartment Rear Trim Panel

Luggage Compartment Rear Trim Panel (76.19.44)

Removal

1. Remove battery cover and disconnect ground cable from battery terminal.
2. Remove trunk floor carpet.
3. Remove and discard the eight fir tree fasteners securing trunk rear finisher to rear panel.







4. Position trunk rear finisher for access, disconnect trunk lamp harness multiplugs and remove lamp assemblies.







5. Remove rear finisher from trunk.

Installation

1. Fit and fully seat lamp assemblies in trunk rear finisher.
2. Position rear finisher in trunk and connect lamp harness multiplugs.
3. Fit and fully seat finisher on trunk rear panel and secure with new fir tree fasteners.
4. Fit trunk floor carpet.
5. Connect ground cable to battery and fit battery cover.