Rear Door Glass Lift Switch/Ashtray Assembly

REAR DOOR GLASS LIFT SWITCH/ASHTRAY ASSEMBLY


Removal
1. Remove casing/armrest assembly from door. Service and Repair
2. Remove armrest from casing. Service and Repair







3. Position armrest for access, slacken and remove two switch pack securing screws and remove switch pack assembly from armrest.







4. Slacken and remove screws securing veneer panels to switch and ashtray.

Installation
1. Position veneer panels on switch and ashtray, and fit and tighten securing screws.
2. Position switch/ashtray assembly on armrest and fit and tighten securing screws.
3. Fit armrest to door casing. Service and Repair
4. Fit casing/armrest assembly to door. Service and Repair