Door Window Control Switch Finish Panel

Door Window Control Switch Finish Panel (76.47.33)

Removal

1. Remove door casing veneer panel.
2. Remove door casing.
3. Remove door armrest and remove switch pack assembly from armrest.
4. Slacken and remove three screws securing door glass lift switch veneer panel to switch pack.







5. Remove veneer panel from switch assembly.

Installation

1. Position veneer panel over switch assembly and fit and tighten securing screws.
2. Position switch pack assembly on armrest and fit and tighten securing screws.
3. Fit armrest to door casing.