Seating

Seating

All front seats are equipped with electric height adjustment. In addition, both seats are available with manual or power forward and rearward adjustment, manual or power operated headrest adjustment, 12 way electric adjustment, memory controlled 12 way seat adjustment and integral seat heating. A side air bag module is installed in the outboard squab wing of each front seat. Each front seat has a non-handed, one-piece frame incorporating cushion and squab frames, side air bag support bracket and seat adjuster mechanisms. Seat switch packs are installed on the outboard side of driver and passenger seats and control modules are installed in the base of each seat. The standard rear seat is of fixed, bench type with full width removable cushion. For certain markets, two individual rear seats are available as an option on long wheelbase models. Both types of rear seat are available with thermostatically controlled heating of the cushion and squab. Individual rear seats are electrically adjustable for squab re cline (via cushion fore and aft movement), head restraint height and lumbar support. Separate motors provide adjustment of each seat cushion and head restraint and an electrically driven air compressor provides variation of lumbar support. Seat adjustment is controlled via switches installed on a panel in an extension to the centre console.Both the driver and front passenger seat are secured to the vehicle floor at four points.