Rear Parcel Tray Inner and Outer Panels

REAR PARCEL TRAY INNER AND OUTER PANELS

Removal
1. Remove rear parcel tray.
2. Place parcel tray face down on clean bench.







3. Where sun blinds are fitted:
1. Slacken and remove nuts securing sun blind to parcel tray.
2. Remove washers.
3. Remove sun blind from parcel tray.







4. Remove eight clips securing parcel tray outer panel to inner panel and separate panels.

Installation
1. Align outer panel to inner panel.
2. Secure panels together with eight clips.
3. Where sun blinds are to be fitted, position rollers on underside of parcel tray, fit washers and fit and tighten nuts to 5 - 7 Nm.
4. Fit parcel tray.