Mechanical Specifications
| Bolt - Final Drive Nose Plate | 30-51 Newton Meter (Nm) |
| Bolt - "A" Frame To Final Drive | 90-110 Newton Meter (Nm) |
| Nut - Axle Shaft To Final Drive Flange | 81-99 Newton Meter (Nm) |
| Nut - Axle Shaft To Hub | 304-336 Newton Meter (Nm) |
| Bolt M10 - Driveshaft To Final Drive Unit Flange | 51-69 Newton Meter (Nm) |
| Nut - Pendulum To Final Drive | 160-200 Newton Meter (Nm) |
| Nut - Tie Rod To Final Drive | 85-105 Newton Meter (Nm) |
| Nut - Wishbone Tie To Final Drive | 85-105 Newton Meter (Nm) |