Tail Lamp: Service and Repair

Rear, Stop, Direction Indicator and Reverse Lamp Assembly


Removal







1. Depress retaining tang and remove rear tamp interior trim finisher.







2. Disconnect rear lamp harness multiplug.







3. Remove three nuts securing rear lamp assembly to BIW and remove lamp from vehicle.

Installation
1. Check that rubber seals are undamaged and correctly positioned on rear lamp assembly.
2. Install rear lamp assembly in BIW aperture, ensuring that rubber seals seat correctly.
3. Install three nuts securing lamp assembly to BIW.
4. Connect harness multiplug to rear lamp assembly.
5. Install interior trim finisher on rear lamp assembly ensuring that retaining tang engages correctly.