Rear Muffler and Tailpipe (Left-Hand)

Rear Muffler and Tailpipe (Left-hand)

Removal
1. Raise the vehicle on a four-post ramp.







2. Slacken the securing clamp, rear muffler to intermediate muffler.







3. Remove the rear muffler and tailpipe assembly.
- Separate the rear muffler from the intermediate muffler.
- Disengage the rear muffler mounting peg from the mounting rubber.
- Remove the rear muffler assembly. Rotate the assembly back and forth to aid removal.
4. Clean the exhaust joints.

Installation







1. Fit the rear muffler and tailpipe assembly.
- Connect the rear muffler to the intermediate muffler and insert to the Nominal indicator ring.







2. Position and align the rear muffler and tailpipe assembly.
- Engage the peg with the mounting rubber.
- Check that the tailpipe position is within the specified settings, adjusting engagement within the Maximum and Minimum indicator rings if necessary; refer to Specifications.







3. Tighten the securing clamp, rear muffler to intermediate muffler.
4. Lower the ramp.