Rear Quarter Upper Trim Pad

REAR QUARTER UPPER TRIM PAD

Removal
1. Remove draught welt from adjacent section of door aperture.
2. Disconnect and remove the rear courtesy/reading light.
3. Remove combined grab handle and coat hanger hook.







4. Carefully ease trim pad fir tree fasteners from BIW locations.
5. Remove trim pad from vehicle and remove and discard fir tree fasteners.

Installation
1. Fit new fir tree fasteners to trim pad.
2. Position trim pad at rear quarter and press and fully seat fir tree fasteners in BIW locations.
3. Fit combined grab handle and coat hanger hook.
4. Connect and fit rear courtesy/reading light.
5. Fit draught welt to adjacent section of door aperture flange.