Side Liner

Removal
1. Remove battery cover.
2. Remove trunk floor carpet.
3. Remove trunk rear finisher. Rear Finisher
4. Remove rear lamp covers.
5. If fitted, pass fuel filler flap emergency release cord through slot in LH side liner and withdraw liner from trunk.

Installation
1. Position side liner in trunk and where fitted, pass fuel filler flap emergency release cord through slot.
2. Finally position and seat liner.
3. Fit and fully seat rear lamp cover.
4. Fit trunk rear finisher. Rear Finisher
5. Fit trunk front liner. Front Liner
6. Fit trunk floor carpet.
7. Fit battery cover.