Issue/Action

Issue

This bulletin gives the procedure for programing non-rolling code, as well as, rolling code garage door openers (GDO). The rolling code GDO is compatible with older non-rolling code garage door opener receivers.

The garage door opening equipment comprises an electronic module fitted in the vehicle's roof console. This module can be programmed to transmit the radio frequencies of up to three (3) of the owner's current hand held transmitters, for the operation of garage doors, gates, lighting or security systems, and other radio frequency operated services.

WARNING

1. This GDO must not be used with installations that do not have a sensor that will automatically "stop" and "reverse" a closing garage door if an object is detected in its path.

2. When programming a channel, the system that your are programming will be activated if it is within signal range, therefore, make sure that people or objects are clear of the garage doors or gated being opened or closed.

Action:

To program the GDO's roof console module proceed as follows: